About NP16164_01:
Push-button with 8 operating buttons and status indicators. In idle state, the surface of the push-button appears as a uniform plane. The inscription of the keys only becomes visible via the backlit symbols following activation. For this, you can use the enclosed prefabricated foils or the individual symbols with various motifs. Cool white and warm white LEDs show status, the brightness can be defined according to normal and night mode.
ETS device functions:
- Behavior and brightness of the status indicators
- Night mode: LEDs light up with reduced brightness
- Proximity function: The LEDs are only activated and the functions only become visible when approached.
With integrated bus coupler. The bus is connected using a bus connecting terminal.
KNX software functions:
2 programming options: - Express settings: Calls up a pre-set configuration
- Extended settings: Individual configuration
Express settings: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), scenes.
Extended settings: Switching, dimming, value output, scene control (recal/store a scene), blind, shift register (stepwise, without steps), RGB lighting (RGB, RGBW), multiple operation in which you can define various functions manually (4 objects - on/off, up/down, recall scene, store scene, percentage, unsigned value), delay mode, color temperature control. For all function a distinction can be made between short and long operation.
General: Scene group, logic function (AND; OR, XOR, threshold comparator, format converter), indication behaviors, locking function.
Note: Programmable with ETS5 and higher.
Contents: Device with inserted prefabricated foil. Additional foil with various symbols. Mount-ing screws.
